Source Code
|
These source-code files are part of a reconstructed copy of Luminary 97, the
original release of the Apollo 11 Lunar Module (LM) Apollo Guidance Computer
(AGC) software.
The reconstruction began with source code of Luminary 99 revision 1 previously
transcribed from a digitized copy of that program. The code was then updated
by undoing changes described in original Luminary memos 83 and 85, using asterisks
indicating changed lines in the listing as a guide. The reconstruction was
verified by matching memory-bank checksums to those listed in drawing 2021152D.
Note that page numbers in the reconstructed code match those on the Luminary 099
revision 001 printout, although the added code would likely have changed page
numbers for a real Luminary 97 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
054448,000002: ## Copyright: Public domain.
054449,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054450,000004: ## Purpose: A section of Luminary revision 97.
054451,000005: ## It is part of the reconstructed source code for the
054452,000006: ## original release of the flight software for the Lunar
054453,000007: ## Module's (LM) Apollo Guidance Computer (AGC) for Apollo 11.
054454,000008: ## The code has been recreated from a copy of Luminary 99
054455,000009: ## revision 001, using asterisks indicating changed lines in
054456,000010: ## the listing and Luminary Memos #83 and #85, which list
054457,000011: ## changes between Luminary 97 and 98, and 98 and 99. The
054458,000012: ## code has been adapted such that the resulting bugger words
054459,000013: ## exactly match those specified for Luminary 97 in NASA drawing
054460,000014: ## 2021152D, which gives relatively high confidence that the
054461,000015: ## reconstruction is correct.
054462,000016: ## Reference: pp. 1294-1302
054463,000017: ## Assembler: yaYUL
054464,000018: ## Contact: Ron Burkey <info@sandroid.org>.
054465,000019: ## Website: www.ibiblio.org/apollo/index.html
054466,000020: ## Mod history: 2019-07-28 MAS Created from Luminary 99.
054467,000021:
|
|
Page 1294
|
054469,000023: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054470,000024:
054471,000025: 43,3724 COUNT* $$/PHASE
054472,000026: 5311 BLOCK 02
054473,000027: 4000 SETLOC FFTAG1
054474,000028: 4000 BANK
054475,000029:
054476,000030: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054477,000031: 5312 30000 CAF 0
054478,000032: 5313 24002 INCR Q
054479,000033:
054480,000034: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054481,000035: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054482,000036: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054483,000037: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054484,000038: 5320 20213 CADR SETUPDSP
054485,000039:
054486,000040: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054487,000041:
054488,000042: 5321 50002 CHECKMM INDEX Q
054489,000043: 5322 40000 CS 0
054490,000044: 5323 61011 AD MODREG
054491,000045: 5324 00006 EXTEND
054492,000046: 5325 16741 BZF Q+2
054493,000047: 5326 16737 TCF Q+1 # NO MATCH
054494,000048:
054495,000049: 5327 6742 TCQ = Q+2 +1
054496,000050:
054497,000051: 14,3774 BANK 14
054498,000052: 10,2000 SETLOC PHASETAB
054499,000053: 10,2000 BANK
054500,000054:
054501,000055: 10,2213 COUNT* $$/PHASE
054502,000056: 10,2213 00004 SETUPDSP INHINT
054503,000057: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054504,000058: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054505,000059: 10,2216 05072 TC NOVAC # NEWMODE X
054506,000060: 10,2217 1011 EBANK= MODREG
054507,000061: 10,2217 03534 60102 2CADR DSPMMJOB
054508,000062:
054509,000063: 10,2221 52071 DXCH RUPTREG1
054510,000064: 10,2222 00003 RELINT
054511,000065: 10,2223 52006 DXCH Z # RETURN
054512,000066:
054513,000067: 10,2224 40,3534 DSPMMJOB EQUALS DSPMMJB
054514,000068:
054515,000069: 5327 BLOCK 02
054516,000070: 4000 SETLOC FFTAG1
054517,000071: 4000 BANK
054518,000072:
|
|
Page 1295
|
054520,000074: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054521,000075: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054522,000076: # TC PHASCHNG
054523,000077: # OCT XXXXX
054524,000078: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054525,000079: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054526,000080: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054527,000081: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054528,000082: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054529,000083: # LONGCALL TO BE RESTARTED.
054530,000084: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054531,000085:
054532,000086: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054533,000087: # TL0 00P PPP PPP GGG ,
054534,000088: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054535,000089: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054536,000090: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054537,000091: # IT IS SET TO 0. SOME EXAMPLES,
054538,000092: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054539,000093: # OCT 00003 MAKING GROUP 3 INACTIVE
054540,000094:
054541,000095: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054542,000096: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054543,000097:
054544,000098: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054545,000099: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054546,000100: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054547,000101: # LOCATION
054548,000102:
054549,000103: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054550,000104: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054551,000105: # LONGBASE WAS SET THIS SINGLE ENTRY
054552,000106: # SHOULD BE A LONGCALL)
054553,000107:
054554,000108: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054555,000109: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054556,000110: # LONGCALL TO BE RESTARTED
054557,000111:
054558,000112: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054559,000113: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054560,000114: # TL0 1AD XXX CJW GGG
054561,000115: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054562,000116: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054563,000117: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1296
|
054565,000119: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054566,000120: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054567,000121: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054568,000122: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054569,000123: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054570,000124: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054571,000125: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054572,000126: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054573,000127: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054574,000128: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054575,000129: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054576,000130: # AD+3 ALSO GO TO AD+3
054577,000131:
054578,000132: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054579,000133: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054580,000134: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054581,000135: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054582,000136: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054583,000137: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054584,000138: # LOCATION AD+5
054585,000139:
054586,000140: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054587,000141: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054588,000142:
054589,000143: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054590,000144: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054591,000145: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054592,000146: # TL1 DAP PPP PPP GGG
054593,000147: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054594,000148: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054595,000149: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054596,000150: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054597,000151: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054598,000152: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054599,000153: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054600,000154: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054601,000155: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054602,000156: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054603,000157: # AD+5 GO TO AD+5
054604,000158:
054605,000159: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054606,000160: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054607,000161: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054608,000162: # BY MEANS OF GROUP 5
|
|
Page 1297
|
054610,000164: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054611,000165:
054612,000166: # SUMMARY OF BITS
054613,000167: # TYPE A TL0 00P PPP PPP GGG
054614,000168: # TYPE B TL1 DAP PPP PPP GGG
054615,000169: # TYPE C TL0 1AD XXX CJW GGG
054616,000170:
|
|
Page 1298
|
054618,000172: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054619,000173: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054620,000174: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054621,000175: # TC 2PHSCHNG
054622,000176: # OCT XXXXX
054623,000177: # OCT YYYYY
054624,000178: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054625,000179: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054626,000180: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054627,000181: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054628,000182: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054629,000183: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054630,000184: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054631,000185: # AD+4 FOR GROUP 5 PHASE INFORMATION
054632,000186:
054633,000187: 5327 COUNT* $$/PHASE
054634,000188: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054635,000189: 5330 50002 NDX Q
054636,000190: 5331 30000 CA 0
054637,000191: 5332 24002 INCR Q
054638,000192: 5333 54072 TS TEMPP2
054639,000193:
054640,000194: 5334 74757 MASK OCT7
054641,000195: 5335 60000 DOUBLE
054642,000196: 5336 54071 TS TEMPG2
054643,000197:
054644,000198: 5337 30072 CA TEMPP2
054645,000199: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054646,000200: 5341 00006 EXTEND
054647,000201: 5342 74740 MP BIT12
054648,000202: 5343 56072 XCH TEMPP2
054649,000203:
054650,000204: 5344 74735 MASK BIT15
054651,000205: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054652,000206:
054653,000207: 5346 50002 INDEX Q
054654,000208: 5347 30000 CA 0
054655,000209: 5350 24002 INCR Q
054656,000210: 5351 54065 TS TEMPSW
054657,000211:
054658,000212: 5352 15363 TCF PHASJUMP
054659,000213:
054660,000214: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054661,000215: 5354 50002 INDEX Q
054662,000216: 5355 30000 CA 0
054663,000217: 5356 24002 INCR Q
054664,000218: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1299
|
054666,000220: 5360 54065 TS TEMPSW
054667,000221: 5361 34753 CA ONE
054668,000222: 5362 54066 TS TEMPSW2
054669,000223: 5363 00006 PHASJUMP EXTEND
054670,000224: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054671,000225: 5365 52006 DTCB
054672,000226:
054673,000227: 5366 E3,1400 EBANK= LST1
054674,000228: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054675,000229:
054676,000230: 5370 22073 ONEORTWO LXCH TEMPBBCN
054677,000231: 5371 22006 LXCH BBANK
054678,000232: 5372 22073 LXCH TEMPBBCN
054679,000233:
054680,000234: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054681,000235: 5374 10000 CCS A
054682,000236: 5375 17750 TCF CHECKB # IT IS OF TYPE :B:
054683,000237:
054684,000238: 5376 30062 CA TEMPP
054685,000239: 5377 74745 MASK BIT7
054686,000240: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054687,000241: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054688,000242:
054689,000243: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054690,000244: 5403 31052 CA PHSPRDT1 -2
054691,000245: 5404 54070 TS TEMPPR
054692,000246:
054693,000247: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054694,000248: 5406 74744 MASK BIT8
054695,000249: 5407 10000 CCS A
054696,000250: 5410 15427 TCF GETNEWNM
054697,000251:
054698,000252: 5411 30002 CA Q
054699,000253: 5412 54063 TS TEMPNM
054700,000254: 5413 30006 CA BB
054701,000255: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054702,000256: 5415 04007 ROR SUPERBNK
054703,000257: 5416 54064 TS TEMPBB
054704,000258:
054705,000259: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054706,000260: 5420 22073 LXCH TEMPBBCN
054707,000261: 5421 52006 DTCB
054708,000262:
054709,000263: 5422 02312 CON2ADR GENADR CON2
054710,000264:
054711,000265: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054712,000266: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054713,000267: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1300
|
054715,000269: 5426 15404 TCF CON1 -1
054716,000270:
054717,000271: 5427 00006 GETNEWNM EXTEND
054718,000272: 5430 50002 INDEX Q
054719,000273: 5431 30001 DCA 0
054720,000274: 5432 52064 DXCH TEMPNM
054721,000275: 5433 34752 CA TWO
054722,000276: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054723,000277:
054724,000278: 5435 15417 TCF TOCON2
054725,000279:
054726,000280: 5436 5024 OCT14000 EQUALS PRIO14
054727,000281: 5436 0061 TEMPG EQUALS ITEMP1
054728,000282: 5436 0062 TEMPP EQUALS ITEMP2
054729,000283: 5436 0063 TEMPNM EQUALS ITEMP3
054730,000284: 5436 0064 TEMPBB EQUALS ITEMP4
054731,000285: 5436 0065 TEMPSW EQUALS ITEMP5
054732,000286: 5436 0066 TEMPSW2 EQUALS ITEMP6
054733,000287: 5436 0070 TEMPPR EQUALS RUPTREG1
054734,000288: 5436 0071 TEMPG2 EQUALS RUPTREG2
054735,000289: 5436 0072 TEMPP2 EQUALS RUPTREG3
054736,000290:
054737,000291: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054738,000292: 5436 0000006 BB EQUALS BBANK
054739,000293:
054740,000294: 14,3774 BANK 14
054741,000295: 10,2000 SETLOC PHASETAB
054742,000296: 10,2000 BANK
054743,000297:
054744,000298: 10,2224 E3,1436 EBANK= PHSNAME1
054745,000299: 10,2224 COUNT* $$/PHASE
054746,000300: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054747,000301: 10,2225 30065 CA TEMPSW
054748,000302: 10,2226 74757 MASK OCT7
054749,000303: 10,2227 60000 DOUBLE
054750,000304: 10,2230 54061 TS TEMPG
054751,000305:
054752,000306: 10,2231 30065 CA TEMPSW
054753,000307: 10,2232 75030 MASK OCT17770
054754,000308: 10,2233 00006 EXTEND
054755,000309: 10,2234 74740 MP BIT12
054756,000310: 10,2235 54062 TS TEMPP
054757,000311:
054758,000312: 10,2236 30065 CA TEMPSW
054759,000313: 10,2237 74101 MASK OCT60000
054760,000314: 10,2240 56065 XCH TEMPSW
054761,000315: 10,2241 75024 MASK OCT14000
054762,000316: 10,2242 10000 CCS A
|
|
Page 1301
|
054764,000318: 10,2243 15370 TCF ONEORTWO
054765,000319:
054766,000320: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054767,000321: 10,2245 50061 NDX TEMPG
054768,000322: 10,2246 54751 TS PHASE1 -2
054769,000323:
054770,000324: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054771,000325: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054772,000326:
054773,000327: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054774,000328: 10,2252 40072 CS TEMPP2
054775,000329: 10,2253 22072 LXCH TEMPP2
054776,000330: 10,2254 50071 NDX TEMPG2
054777,000331: 10,2255 52751 DXCH -PHASE1 -2
054778,000332:
054779,000333: 10,2256 10066 CCS TEMPSW2
054780,000334: 10,2257 12260 NOOP # CAN:T GET HERE
054781,000335: 10,2260 12264 TCF BELOW2
054782,000336:
054783,000337: 10,2261 40025 CS TIME1
054784,000338: 10,2262 50071 NDX TEMPG2
054785,000339: 10,2263 55051 TS TBASE1 -2
054786,000340:
054787,000341: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054788,000342: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054789,000343: 10,2266 12303 TCF BELOW4 # SET NEITHER
054790,000344:
054791,000345: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054792,000346: 10,2270 50061 NDX TEMPG
054793,000347: 10,2271 55051 TS TBASE1 -2
054794,000348:
054795,000349: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054796,000350: 10,2273 62276 AD BIT14COM
054797,000351: 10,2274 10000 CCS A
054798,000352: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054799,000353: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054800,000354: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054801,000355:
054802,000356: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054803,000357: 10,2301 30025 DCA TIME2
054804,000358: 10,2302 53152 DXCH LONGBASE
054805,000359:
054806,000360: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054807,000361: 10,2304 50061 NDX TEMPG
054808,000362: 10,2305 54750 TS -PHASE1 -2
054809,000363:
054810,000364: 10,2306 30002 CA Q
054811,000365: 10,2307 22073 LXCH TEMPBBCN
054812,000366: 10,2310 00003 RELINT
054813,000367: 10,2311 52006 DTCB
|
|
Page 1302
|
054815,000369: 10,2312 22073 CON2 LXCH TEMPBBCN
054816,000370:
054817,000371: 10,2313 30062 CA TEMPP
054818,000372: 10,2314 50061 NDX TEMPG
054819,000373: 10,2315 54751 TS PHASE1 -2
054820,000374:
054821,000375: 10,2316 30070 CA TEMPPR
054822,000376: 10,2317 50061 NDX TEMPG
054823,000377: 10,2320 55052 TS PHSPRDT1 -2
054824,000378:
054825,000379: 10,2321 00006 EXTEND
054826,000380: 10,2322 30064 DCA TEMPNM
054827,000381: 10,2323 50061 NDX TEMPG
054828,000382: 10,2324 53435 DXCH PHSNAME1 -2
054829,000383:
054830,000384: 10,2325 12247 TCF BELOW1
054831,000385:
054832,000386: 7750 BLOCK 03
054833,000387: 6000 SETLOC FFTAG6
054834,000388: 6000 BANK
054835,000389:
054836,000390: 7750 COUNT* $$/PHASE
054837,000391: 7750 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054838,000392: 7751 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054839,000393: 7752 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054840,000394:
054841,000395: 7753 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054842,000396:
054843,000397:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc