Source Code
|
These source-code files are part of a reconstructed copy of Artemis 071, the
first release of the Apollo 15 through 17 Command Module (CM) Apollo Guidance
Computer (AGC) software.
The reconstruction began with source code of Artemis 072 previously transcribed
from a digitized copy of that program. The code was then updated by undoing
changes between the two versions. The reconstruction was verified by matching
memory-bank checksums to those listed in drawing 2021154-. Note that page
numbers in the reconstructed code match those on the Artemis 072 printout,
although the changed code would likely have changed page numbers for a real
Artemis 071 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
060031,000002: ## Copyright: Public domain.
060032,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
060033,000004: ## Purpose: A section of Artemis revision 071.
060034,000005: ## It is part of the reconstructed source code for the first
060035,000006: ## release of the flight software for the Command Module's
060036,000007: ## (CM) Apollo Guidance Computer (AGC) for Apollo 15 through
060037,000008: ## 17. The code has been recreated from a copy of Artemis 072.
060038,000009: ## It has been adapted such that the resulting bugger words
060039,000010: ## exactly match those specified for Artemis 071 in NASA
060040,000011: ## drawing 2021154-, which gives relatively high confidence
060041,000012: ## that the reconstruction is correct.
060042,000013: ## Reference: 1402
060043,000014: ## Assembler: yaYUL
060044,000015: ## Contact: Ron Burkey <info@sandroid.org>.
060045,000016: ## Website: www.ibiblio.org/apollo/index.html
060046,000017: ## Mod history: 2019-08-14 MAS Created from Artemis 072.
060047,000018:
|
|
Page 1402
|
060049,000020:
060050,000021: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
060051,000022:
060052,000023: 4000 SETLOC FFTAG1
060053,000024: 4000 BANK
060054,000025:
060055,000026: 5344 COUNT* $$/PHASE
060056,000027: 5344 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
060057,000028: 5345 30000 CAF 0
060058,000029: 5346 24002 INCR Q
060059,000030:
060060,000031: 5347 55214 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
060061,000032: 5350 35353 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
060062,000033: 5351 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
060063,000034: 5352 14660 TCF BANKJUMP # PUTS Q INTO A
060064,000035: 5353 20463 CADR SETUPDSP
060065,000036:
060066,000037: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
060067,000038:
060068,000039: 5354 50002 CHECKMM INDEX Q
060069,000040: 5355 40000 CS 0
060070,000041: 5356 61214 AD MODREG
060071,000042: 5357 00006 EXTEND
060072,000043: 5360 16710 BZF Q+2
060073,000044: 5361 16706 TCF Q+1 # NO MATCH
060074,000045:
060075,000046: 10,2000 SETLOC PHASETAB
060076,000047: 10,2000 BANK
060077,000048:
060078,000049: 10,2463 COUNT* $$/PHASE
060079,000050: 10,2463 00004 SETUPDSP INHINT
060080,000051: 10,2464 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
060081,000052: 10,2465 05120 TC NOVAC30 # EITHER A TASK OR JOB CAN COMETO NEWMODEX
060082,000053: 10,2466 1214 EBANK= MODREG
060083,000054: 10,2466 03377 60102 2CADR DSPMMJOB
060084,000055:
060085,000056: 10,2470 52071 DXCH RUPTREG1
060086,000057: 10,2471 00003 RELINT
060087,000058: 10,2472 52006 DXCH Z # RETURN
060088,000059:
060089,000060: 10,2473 40,3377 DSPMMJOB EQUALS DSPMMJB
060090,000061:
060091,000062: 4000 SETLOC FFTAG1
060092,000063: 4000 BANK
|
|
Page 1403
|
060094,000065:
060095,000066: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
060096,000067: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
060097,000068:
060098,000069: # TC PHASCHNG
060099,000070: # OCT XXXXX
060100,000071:
060101,000072: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
060102,000073: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
060103,000074:
060104,000075: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
060105,000076: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
060106,000077: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
060107,000078: # LONGCALL TO BE RESTARTED.
060108,000079: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
060109,000080:
060110,000081: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
060111,000082:
060112,000083: # TL0 00P PPP PPP GGG ,
060113,000084:
060114,000085: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
060115,000086: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
060116,000087: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
060117,000088: # IT IS SET TO 0. SOME EXAMPLES,
060118,000089:
060119,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
060120,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
060121,000092:
060122,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
060123,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
060124,000095:
060125,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
060126,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
060127,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
060128,000099: # LOCATION
060129,000100: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
060130,000101: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
060131,000102: # LONGBASE WAS SET THIS SINGLE ENTRY
060132,000103: # SHOULD BE A LONGCALL)
060133,000104: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
060134,000105: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
060135,000106: # LONGCALL TO BE RESTARTED
060136,000107:
060137,000108: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
060138,000109: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
060139,000110:
060140,000111: # TL0 1AD XXX CJW GGG
060141,000112:
060142,000113: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
060143,000114: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
060144,000115: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1404
|
060146,000117: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
060147,000118: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
060148,000119: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
060149,000120: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
060150,000121: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
060151,000122: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
060152,000123: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
060153,000124: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
060154,000125:
060155,000126: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
060156,000127: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
060157,000128: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
060158,000129: # AD+3 ALSO GO TO AD+3
060159,000130:
060160,000131: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
060161,000132: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
060162,000133: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
060163,000134: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
060164,000135: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
060165,000136: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
060166,000137: # LOCATION AD+5
060167,000138:
060168,000139: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
060169,000140: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
060170,000141:
060171,000142: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
060172,000143: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
060173,000144: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
060174,000145:
060175,000146: # TL1 DAP PPP PPP GGG
060176,000147:
060177,000148: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
060178,000149: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
060179,000150: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
060180,000151: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
060181,000152: # THE NEXT LOCATION.(THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
060182,000153:
060183,000154: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
060184,000155: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
060185,000156: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
060186,000157: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
060187,000158: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
060188,000159: # AD+5 GO TO AD+5
060189,000160:
060190,000161: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
060191,000162: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
060192,000163: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
060193,000164: # BY MEANS OF GROUP 5
060194,000165:
|
|
Page 1405
|
060196,000167:
060197,000168: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
060198,000169:
060199,000170:
060200,000171: # SUMMARY OF BITS
060201,000172:
060202,000173: # TYPE A TL0 00P PPP PPP GGG
060203,000174:
060204,000175: # TYPE B TL1 DAP PPP PPP GGG
060205,000176:
060206,000177: # TYPE C TL0 1AD XXX CJW GGG
060207,000178:
060208,000179:
|
|
Page 1406
|
060210,000181:
060211,000182: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
060212,000183: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
060213,000184: # CALLS ARE MADE IN THE FOLLOWING MANNER,
060214,000185:
060215,000186: # TC 2PHSCHNG
060216,000187: # OCT XXXXX
060217,000188: # OCT YYYYY
060218,000189:
060219,000190: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
060220,000191: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
060221,000192: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
060222,000193:
060223,000194: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
060224,000195: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
060225,000196: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
060226,000197: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
060227,000198: # AD+4 FOR GROUP 5 PHASE INFORMATION
060228,000199:
060229,000200: 5362 COUNT* $$/PHASE
060230,000201: 5362 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
060231,000202: 5363 50002 NDX Q
060232,000203: 5364 30000 CA 0
060233,000204: 5365 24002 INCR Q
060234,000205: 5366 54072 TS TEMPP2
060235,000206:
060236,000207: 5367 74774 MASK OCT7
060237,000208: 5370 60000 DOUBLE
060238,000209: 5371 54071 TS TEMPG2
060239,000210:
060240,000211: 5372 30072 CA TEMPP2
060241,000212: 5373 75056 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
060242,000213: 5374 00006 EXTEND
060243,000214: 5375 74755 MP BIT12
060244,000215: 5376 56072 XCH TEMPP2
060245,000216:
060246,000217: 5377 74752 MASK BIT15
060247,000218: 5400 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
060248,000219:
060249,000220: 5401 15405 TCF PHASCHNG +3
060250,000221:
060251,000222: 5402 00004 PHASCHNG INHINT
060252,000223: 5403 34770 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
060253,000224: 5404 54066 TS TEMPSW2
060254,000225:
060255,000226: 5405 50002 +3 NDX Q
060256,000227: 5406 30000 CA 0
060257,000228: 5407 24002 INCR Q
060258,000229: 5410 54065 TS TEMPSW
|
|
Page 1407
|
060260,000231: 5411 00006 EXTEND
060261,000232: 5412 35415 DCA ADRPCHN2 # OFF TO SWITCHED BANK
060262,000233: 5413 52006 DTCB
060263,000234:
060264,000235: 5414 E3,1400 EBANK= LST1
060265,000236: 5414 02473 20063 ADRPCHN2 2CADR PHSCHNG2
060266,000237:
060267,000238:
060268,000239: 5416 22073 ONEORTWO LXCH TEMPBBCN
060269,000240: 5417 22006 LXCH BBANK
060270,000241: 5420 22073 LXCH TEMPBBCN
060271,000242:
060272,000243: 5421 75053 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
060273,000244: 5422 10000 CCS A
060274,000245: 5423 15464 TCF CHECKB # IT IS OF TYPE :B:
060275,000246:
060276,000247: 5424 30062 CA TEMPP
060277,000248: 5425 74762 MASK BIT7
060278,000249: 5426 10000 CCS A # SHALL WE USE THE OLD PRIORITY
060279,000250: 5427 15451 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
060280,000251:
060281,000252: 5430 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
060282,000253: 5431 31256 CA PHSPRDT1 -2
060283,000254: 5432 54070 -1 TS TEMPPR
060284,000255:
060285,000256: 5433 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
060286,000257: 5434 74761 MASK BIT8
060287,000258: 5435 10000 CCS A
060288,000259: 5436 15455 TCF GETNEWNM
060289,000260:
060290,000261: 5437 30002 CA Q
060291,000262: 5440 54063 TS TEMPNM
060292,000263: 5441 30006 CA BB
060293,000264: 5442 00006 EXTEND # PICK UP USERS SUPERBANK
060294,000265: 5443 04007 ROR SUPERBNK
060295,000266: 5444 54064 TS TEMPBB
060296,000267:
060297,000268: 5445 35450 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
060298,000269: 5446 22073 LXCH TEMPBBCN
060299,000270: 5447 52006 DTCB
060300,000271:
060301,000272: 5450 02561 CON2ADR GENADR CON2
060302,000273:
060303,000274: 5451 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
060304,000275: 5452 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
060305,000276: 5453 24002 INCR Q # OBTAIN RETURN ADDRESS
060306,000277: 5454 15432 TCF CON1 -1
060307,000278:
060308,000279: 5455 00006 GETNEWNM EXTEND
|
|
Page 1408
|
060310,000281: 5456 50002 INDEX Q
060311,000282: 5457 30001 DCA 0
060312,000283: 5460 52064 DXCH TEMPNM
060313,000284: 5461 34767 CA TWO
060314,000285: 5462 26002 ADS Q # OBTAIN RETURN ADDRESS
060315,000286:
060316,000287: 5463 15445 TCF TOCON2
060317,000288:
060318,000289: 5464 5053 OCT14000 EQUALS PRIO14
060319,000290: 5464 0061 TEMPG EQUALS ITEMP1
060320,000291: 5464 0062 TEMPP EQUALS ITEMP2
060321,000292: 5464 0063 TEMPNM EQUALS ITEMP3
060322,000293: 5464 0064 TEMPBB EQUALS ITEMP4
060323,000294: 5464 0065 TEMPSW EQUALS ITEMP5
060324,000295: 5464 0066 TEMPSW2 EQUALS ITEMP6
060325,000296: 5464 0070 TEMPPR EQUALS RUPTREG1
060326,000297: 5464 0071 TEMPG2 EQUALS RUPTREG2
060327,000298: 5464 0072 TEMPP2 EQUALS RUPTREG3
060328,000299:
060329,000300: 5464 0073 TEMPBBCN EQUALS RUPTREG4
060330,000301: 5464 0000006 BB EQUALS BBANK
060331,000302:
060332,000303: 10,2000 SETLOC PHASETAB
060333,000304: 10,2000 BANK
060334,000305:
060335,000306: 10,2473 E3,1436 EBANK= PHSNAME1
060336,000307: 10,2473 COUNT* $$/PHASE
060337,000308: 10,2473 22073 PHSCHNG2 LXCH TEMPBBCN
060338,000309: 10,2474 30065 CA TEMPSW
060339,000310: 10,2475 74774 MASK OCT7
060340,000311: 10,2476 60000 DOUBLE
060341,000312: 10,2477 54061 TS TEMPG
060342,000313:
060343,000314: 10,2500 30065 CA TEMPSW
060344,000315: 10,2501 75056 MASK OCT17770
060345,000316: 10,2502 00006 EXTEND
060346,000317: 10,2503 74755 MP BIT12
060347,000318: 10,2504 54062 TS TEMPP
060348,000319:
060349,000320: 10,2505 30065 CA TEMPSW
060350,000321: 10,2506 74076 MASK OCT60000
060351,000322: 10,2507 56065 XCH TEMPSW
060352,000323: 10,2510 75053 MASK OCT14000
060353,000324: 10,2511 10000 CCS A
060354,000325:
060355,000326: 10,2512 15416 TCF ONEORTWO
060356,000327:
060357,000328: 10,2513 30062 CA TEMPP # START STORING THE PHASE INFORMATION
060358,000329: 10,2514 50061 NDX TEMPG
|
|
Page 1409
|
060360,000331: 10,2515 55154 TS PHASE1 -2
060361,000332:
060362,000333: 10,2516 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
060363,000334: 10,2517 12533 TCF BELOW2 # IT:S A PHASCHNG
060364,000335:
060365,000336: 10,2520 12521 TCF +1 # IT:S A 2PHSCHNG
060366,000337: 10,2521 40072 CS TEMPP2
060367,000338: 10,2522 22072 LXCH TEMPP2
060368,000339: 10,2523 50071 NDX TEMPG2
060369,000340: 10,2524 53154 DXCH -PHASE1 -2
060370,000341:
060371,000342: 10,2525 10066 CCS TEMPSW2
060372,000343: 10,2526 12527 NOOP # CAN:T GET HERE
060373,000344: 10,2527 12533 TCF BELOW2
060374,000345:
060375,000346: 10,2530 40025 CS TIME1
060376,000347: 10,2531 50071 NDX TEMPG2
060377,000348: 10,2532 55255 TS TBASE1 -2
060378,000349:
060379,000350: 10,2533 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
060380,000351: 10,2534 12547 TCF BELOW3 # SET LONGBASE ONLY
060381,000352: 10,2535 12552 TCF BELOW4 # SET NEITHER
060382,000353:
060383,000354: 10,2536 40025 CS TIME1 # SET TBASE TO BEGIN WITH
060384,000355: 10,2537 50061 NDX TEMPG
060385,000356: 10,2540 55255 TS TBASE1 -2
060386,000357:
060387,000358: 10,2541 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
060388,000359: 10,2542 62545 AD BIT14COM
060389,000360: 10,2543 10000 CCS A
060390,000361: 10,2544 12545 NOOP # ***** CANT GET HERE *****
060391,000362: 10,2545 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
060392,000363: 10,2546 12552 TCF BELOW4 # NO WE NEED ONLY SET TBASE
060393,000364:
060394,000365: 10,2547 00006 BELOW3 EXTEND # SET LONGBASE
060395,000366: 10,2550 30025 DCA TIME2
060396,000367: 10,2551 53303 DXCH LONGBASE
060397,000368:
060398,000369: 10,2552 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
060399,000370: 10,2553 50061 NDX TEMPG
060400,000371: 10,2554 55153 TS -PHASE1 -2
060401,000372:
060402,000373: 10,2555 30002 CA Q
060403,000374: 10,2556 22073 LXCH TEMPBBCN
060404,000375: 10,2557 00003 RELINT
060405,000376: 10,2560 52006 DTCB
060406,000377: 10,2561 22073 CON2 LXCH TEMPBBCN
060407,000378:
060408,000379: 10,2562 30062 CA TEMPP
060409,000380: 10,2563 50061 NDX TEMPG
|
|
Page 1410
|
060411,000382: 10,2564 55154 TS PHASE1 -2
060412,000383:
060413,000384: 10,2565 30070 CA TEMPPR
060414,000385: 10,2566 50061 NDX TEMPG
060415,000386: 10,2567 55256 TS PHSPRDT1 -2
060416,000387:
060417,000388: 10,2570 00006 EXTEND
060418,000389: 10,2571 30064 DCA TEMPNM
060419,000390: 10,2572 50061 NDX TEMPG
060420,000391: 10,2573 53435 DXCH PHSNAME1 -2
060421,000392:
060422,000393: 10,2574 12516 TCF BELOW1
060423,000394:
060424,000395: 4000 SETLOC FFTAG1
060425,000396: 4000 BANK
060426,000397:
060427,000398: 5464 COUNT* $$/PHASE
060428,000399: 5464 74755 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
060429,000400: 5465 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
060430,000401: 5466 15451 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
060431,000402:
060432,000403: 5467 15430 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc