Source Code
|
This is a reconstructed version of Luminary 130, the initial AGC program released
in November 1969 for the Apollo 13 LM. Three more releases
followed before the flown revision was finally manufactured in February 1970.
This reconstruction was created from a previous transcription of the original listing of
Luminary 131, combined with Luminary memo #129 which describes the small difference
between the Luminary 130 and 131. The reconstructed source code was verified by
matching memory-bank checksums to those listed for Luminary 130 in drawing 2021152G.
In this source code, program comments from the original (Luminary 131) code are
prefixed with '#', while those added later by the Virtual AGC project are prefixed
with '##'.
|
054522,000002: ## Copyright: Public domain.
054523,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054524,000004: ## Purpose: A section of the reconstructed source code for Luminary 130.
054525,000005: ## This was the original program released for the Apollo 13 LM,
054526,000006: ## although several more revisions would follow. It has been
054527,000007: ## reconstructed from a listing of Luminary 131, from which it
054528,000008: ## differs on only two lines in P70-P71. The difference is
054529,000009: ## described in detail in Luminary memo #129, which was used
054530,000010: ## to perform the reconstruction. This file is intended to be a
054531,000011: ## faithful reconstruction, except that the code format has been
054532,000012: ## changed to conform to the requirements of the yaYUL assembler
054533,000013: ## rather than the original YUL assembler.
054534,000014: ## Reference: pp. 1286-1294
054535,000015: ## Contact: Ron Burkey <info@sandroid.org>.
054536,000016: ## Website: www.ibiblio.org/apollo
054537,000017: ## Mod history: 06/05/03 RSB. Began transcribing.
054538,000018: ## 2011-05-07 JL Removed workaround. Flagged SBANK= workaround
054539,000019: ## for future removal.
054540,000020: ## 2017-01-06 RSB Page numbers now agree with those on the
054541,000021: ## original hardcopy, as opposed to the PDF page
054542,000022: ## numbers in 1701.pdf.
054543,000023: ## 2017-01-28 RSB Back-ported some comment-text fixes from Luminary 69.
054544,000024: ## 2017-02-27 RSB Proofed comment text using octopus/ProoferComments.
054545,000025: ## 2017-03-01 RSB Fixed lingering comment-text typos.
054546,000026: ## 2017-03-14 RSB Comment-text fixes noted in proofing Luminary 116.
054547,000027: ## 2017-03-16 RSB Comment-text fixes identified in 5-way
054548,000028: ## side-by-side diff of Luminary 69/99/116/131/210.
054549,000029: ## 2017-06-17 MAS Globally removed all SBANK= workarounds.
054550,000030: ## 2018-09-04 MAS Copied from Luminary 131 for Luminary 130.
054551,000031:
|
|
Page 1286
|
054553,000033: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054554,000034:
054555,000035: 43,3751 COUNT* $$/PHASE
054556,000036: 5311 BLOCK 02
054557,000037: 4000 SETLOC FFTAG1
054558,000038: 4000 BANK
054559,000039:
054560,000040: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054561,000041: 5312 30000 CAF 0
054562,000042: 5313 24002 INCR Q
054563,000043:
054564,000044: 5314 55010 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054565,000045: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054566,000046: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054567,000047: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054568,000048: 5320 20213 CADR SETUPDSP
054569,000049:
054570,000050: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054571,000051:
054572,000052: 5321 50002 CHECKMM INDEX Q
054573,000053: 5322 40000 CS 0
054574,000054: 5323 61010 AD MODREG
054575,000055: 5324 00006 EXTEND
054576,000056: 5325 16744 BZF Q+2
054577,000057: 5326 16742 TCF Q+1 # NO MATCH
054578,000058:
054579,000059: 5327 6745 TCQ = Q+2 +1
054580,000060:
054581,000061: 14,3775 BANK 14
054582,000062: 10,2000 SETLOC PHASETAB
054583,000063: 10,2000 BANK
054584,000064:
054585,000065: 10,2213 COUNT* $$/PHASE
054586,000066: 10,2213 00004 SETUPDSP INHINT
054587,000067: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054588,000068: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054589,000069: 10,2216 05072 TC NOVAC # NEWMODE X
054590,000070: 10,2217 1010 EBANK= MODREG
054591,000071: 10,2217 03577 60102 2CADR DSPMMJOB
054592,000072:
054593,000073: 10,2221 52071 DXCH RUPTREG1
054594,000074: 10,2222 00003 RELINT
054595,000075: 10,2223 52006 DXCH Z # RETURN
054596,000076:
054597,000077: 10,2224 40,3577 DSPMMJOB EQUALS DSPMMJB
054598,000078:
054599,000079: 5327 BLOCK 02
054600,000080: 4000 SETLOC FFTAG1
054601,000081: 4000 BANK
|
|
Page 1287
|
054603,000083: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054604,000084: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054605,000085: # TC PHASCHNG
054606,000086: # OCT XXXXX
054607,000087: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054608,000088: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054609,000089: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054610,000090: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054611,000091: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054612,000092: # LONGCALL TO BE RESTARTED.
054613,000093: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054614,000094:
054615,000095: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054616,000096: # TL0 00P PPP PPP GGG ,
054617,000097: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054618,000098: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054619,000099: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054620,000100: # IT IS SET TO 0. SOME EXAMPLES,
054621,000101: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054622,000102: # OCT 00003 MAKING GROUP 3 INACTIVE
054623,000103:
054624,000104: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054625,000105: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054626,000106:
054627,000107: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054628,000108: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054629,000109: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054630,000110: # LOCATION
054631,000111:
054632,000112: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054633,000113: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054634,000114: # LONGBASE WAS SET THIS SINGLE ENTRY
054635,000115: # SHOULD BE A LONGCALL)
054636,000116:
054637,000117: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054638,000118: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054639,000119: # LONGCALL TO BE RESTARTED
054640,000120:
054641,000121: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054642,000122: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054643,000123: # TL0 1AD XXX CJW GGG
054644,000124: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054645,000125: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054646,000126: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1288
|
054648,000128: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054649,000129: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054650,000130: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054651,000131: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054652,000132: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054653,000133: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054654,000134: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054655,000135: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054656,000136: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054657,000137: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054658,000138: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054659,000139: # AD+3 ALSO GO TO AD+3
054660,000140:
054661,000141: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054662,000142: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054663,000143: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054664,000144: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054665,000145: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054666,000146: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054667,000147: # LOCATION AD+5
054668,000148:
054669,000149: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054670,000150: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054671,000151:
054672,000152: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054673,000153: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054674,000154: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054675,000155: # TL1 DAP PPP PPP GGG
054676,000156: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054677,000157: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054678,000158: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054679,000159: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054680,000160: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054681,000161: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054682,000162: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054683,000163: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054684,000164: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054685,000165: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054686,000166: # AD+5 GO TO AD+5
054687,000167:
054688,000168: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054689,000169: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054690,000170: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054691,000171: # BY MEANS OF GROUP 5
|
|
Page 1289
|
054693,000173: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054694,000174:
054695,000175: # SUMMARY OF BITS
054696,000176: # TYPE A TL0 00P PPP PPP GGG
054697,000177: # TYPE B TL1 DAP PPP PPP GGG
054698,000178: # TYPE C TL0 1AD XXX CJW GGG
054699,000179:
|
|
Page 1290
|
054701,000181: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054702,000182: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054703,000183: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054704,000184: # TC 2PHSCHNG
054705,000185: # OCT XXXXX
054706,000186: # OCT YYYYY
054707,000187: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054708,000188: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054709,000189: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054710,000190: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054711,000191: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054712,000192: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054713,000193: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054714,000194: # AD+4 FOR GROUP 5 PHASE INFORMATION
054715,000195:
054716,000196: 5327 COUNT* $$/PHASE
054717,000197: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054718,000198: 5330 50002 NDX Q
054719,000199: 5331 30000 CA 0
054720,000200: 5332 24002 INCR Q
054721,000201: 5333 54072 TS TEMPP2
054722,000202:
054723,000203: 5334 74757 MASK OCT7
054724,000204: 5335 60000 DOUBLE
054725,000205: 5336 54071 TS TEMPG2
054726,000206:
054727,000207: 5337 30072 CA TEMPP2
054728,000208: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054729,000209: 5341 00006 EXTEND
054730,000210: 5342 74740 MP BIT12
054731,000211: 5343 56072 XCH TEMPP2
054732,000212:
054733,000213: 5344 74735 MASK BIT15
054734,000214: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054735,000215:
054736,000216: 5346 50002 INDEX Q
054737,000217: 5347 30000 CA 0
054738,000218: 5350 24002 INCR Q
054739,000219: 5351 54065 TS TEMPSW
054740,000220:
054741,000221: 5352 15363 TCF PHASJUMP
054742,000222:
054743,000223: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054744,000224: 5354 50002 INDEX Q
054745,000225: 5355 30000 CA 0
054746,000226: 5356 24002 INCR Q
054747,000227: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1291
|
054749,000229: 5360 54065 TS TEMPSW
054750,000230: 5361 34753 CA ONE
054751,000231: 5362 54066 TS TEMPSW2
054752,000232: 5363 00006 PHASJUMP EXTEND
054753,000233: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054754,000234: 5365 52006 DTCB
054755,000235:
054756,000236: 5366 E3,1400 EBANK= LST1
054757,000237: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054758,000238:
054759,000239: 5370 22073 ONEORTWO LXCH TEMPBBCN
054760,000240: 5371 22006 LXCH BBANK
054761,000241: 5372 22073 LXCH TEMPBBCN
054762,000242:
054763,000243: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054764,000244: 5374 10000 CCS A
054765,000245: 5375 17753 TCF CHECKB # IT IS OF TYPE :B:
054766,000246:
054767,000247: 5376 30062 CA TEMPP
054768,000248: 5377 74745 MASK BIT7
054769,000249: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054770,000250: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054771,000251:
054772,000252: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054773,000253: 5403 31051 CA PHSPRDT1 -2
054774,000254: 5404 54070 TS TEMPPR
054775,000255:
054776,000256: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054777,000257: 5406 74744 MASK BIT8
054778,000258: 5407 10000 CCS A
054779,000259: 5410 15427 TCF GETNEWNM
054780,000260:
054781,000261: 5411 30002 CA Q
054782,000262: 5412 54063 TS TEMPNM
054783,000263: 5413 30006 CA BB
054784,000264: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054785,000265: 5415 04007 ROR SUPERBNK
054786,000266: 5416 54064 TS TEMPBB
054787,000267:
054788,000268: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054789,000269: 5420 22073 LXCH TEMPBBCN
054790,000270: 5421 52006 DTCB
054791,000271:
054792,000272: 5422 02312 CON2ADR GENADR CON2
054793,000273:
054794,000274: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054795,000275: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054796,000276: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1292
|
054798,000278: 5426 15404 TCF CON1 -1
054799,000279:
054800,000280: 5427 00006 GETNEWNM EXTEND
054801,000281: 5430 50002 INDEX Q
054802,000282: 5431 30001 DCA 0
054803,000283: 5432 52064 DXCH TEMPNM
054804,000284: 5433 34752 CA TWO
054805,000285: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054806,000286:
054807,000287: 5435 15417 TCF TOCON2
054808,000288:
054809,000289: 5436 5024 OCT14000 EQUALS PRIO14
054810,000290: 5436 0061 TEMPG EQUALS ITEMP1
054811,000291: 5436 0062 TEMPP EQUALS ITEMP2
054812,000292: 5436 0063 TEMPNM EQUALS ITEMP3
054813,000293: 5436 0064 TEMPBB EQUALS ITEMP4
054814,000294: 5436 0065 TEMPSW EQUALS ITEMP5
054815,000295: 5436 0066 TEMPSW2 EQUALS ITEMP6
054816,000296: 5436 0070 TEMPPR EQUALS RUPTREG1
054817,000297: 5436 0071 TEMPG2 EQUALS RUPTREG2
054818,000298: 5436 0072 TEMPP2 EQUALS RUPTREG3
054819,000299:
054820,000300: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054821,000301: 5436 0000006 BB EQUALS BBANK
054822,000302:
054823,000303: 14,3775 BANK 14
054824,000304: 10,2000 SETLOC PHASETAB
054825,000305: 10,2000 BANK
054826,000306:
054827,000307: 10,2224 E3,1436 EBANK= PHSNAME1
054828,000308: 10,2224 COUNT* $$/PHASE
054829,000309: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054830,000310: 10,2225 30065 CA TEMPSW
054831,000311: 10,2226 74757 MASK OCT7
054832,000312: 10,2227 60000 DOUBLE
054833,000313: 10,2230 54061 TS TEMPG
054834,000314:
054835,000315: 10,2231 30065 CA TEMPSW
054836,000316: 10,2232 75030 MASK OCT17770
054837,000317: 10,2233 00006 EXTEND
054838,000318: 10,2234 74740 MP BIT12
054839,000319: 10,2235 54062 TS TEMPP
054840,000320:
054841,000321: 10,2236 30065 CA TEMPSW
054842,000322: 10,2237 74101 MASK OCT60000
054843,000323: 10,2240 56065 XCH TEMPSW
054844,000324: 10,2241 75024 MASK OCT14000
054845,000325: 10,2242 10000 CCS A
|
|
Page 1293
|
054847,000327: 10,2243 15370 TCF ONEORTWO
054848,000328:
054849,000329: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054850,000330: 10,2245 50061 NDX TEMPG
054851,000331: 10,2246 54750 TS PHASE1 -2
054852,000332:
054853,000333: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054854,000334: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054855,000335:
054856,000336: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054857,000337: 10,2252 40072 CS TEMPP2
054858,000338: 10,2253 22072 LXCH TEMPP2
054859,000339: 10,2254 50071 NDX TEMPG2
054860,000340: 10,2255 52750 DXCH -PHASE1 -2
054861,000341:
054862,000342: 10,2256 10066 CCS TEMPSW2
054863,000343: 10,2257 12260 NOOP # CAN:T GET HERE
054864,000344: 10,2260 12264 TCF BELOW2
054865,000345:
054866,000346: 10,2261 40025 CS TIME1
054867,000347: 10,2262 50071 NDX TEMPG2
054868,000348: 10,2263 55050 TS TBASE1 -2
054869,000349:
054870,000350: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054871,000351: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054872,000352: 10,2266 12303 TCF BELOW4 # SET NEITHER
054873,000353:
054874,000354: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054875,000355: 10,2270 50061 NDX TEMPG
054876,000356: 10,2271 55050 TS TBASE1 -2
054877,000357:
054878,000358: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054879,000359: 10,2273 62276 AD BIT14COM
054880,000360: 10,2274 10000 CCS A
054881,000361: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054882,000362: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054883,000363: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054884,000364:
054885,000365: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054886,000366: 10,2301 30025 DCA TIME2
054887,000367: 10,2302 53151 DXCH LONGBASE
054888,000368:
054889,000369: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054890,000370: 10,2304 50061 NDX TEMPG
054891,000371: 10,2305 54747 TS -PHASE1 -2
054892,000372:
054893,000373: 10,2306 30002 CA Q
054894,000374: 10,2307 22073 LXCH TEMPBBCN
054895,000375: 10,2310 00003 RELINT
054896,000376: 10,2311 52006 DTCB
|
|
Page 1294
|
054898,000378: 10,2312 22073 CON2 LXCH TEMPBBCN
054899,000379:
054900,000380: 10,2313 30062 CA TEMPP
054901,000381: 10,2314 50061 NDX TEMPG
054902,000382: 10,2315 54750 TS PHASE1 -2
054903,000383:
054904,000384: 10,2316 30070 CA TEMPPR
054905,000385: 10,2317 50061 NDX TEMPG
054906,000386: 10,2320 55051 TS PHSPRDT1 -2
054907,000387:
054908,000388: 10,2321 00006 EXTEND
054909,000389: 10,2322 30064 DCA TEMPNM
054910,000390: 10,2323 50061 NDX TEMPG
054911,000391: 10,2324 53435 DXCH PHSNAME1 -2
054912,000392:
054913,000393: 10,2325 12247 TCF BELOW1
054914,000394:
054915,000395: 7753 BLOCK 03
054916,000396: 6000 SETLOC FFTAG6
054917,000397: 6000 BANK
054918,000398:
054919,000399: 7753 COUNT* $$/PHASE
054920,000400: 7753 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054921,000401: 7754 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054922,000402: 7755 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054923,000403:
054924,000404: 7756 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054925,000405:
054926,000406:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc