Source Code
|
These source-code files are part of a reconstructed copy of Luminary 98, a
development version of the Apollo 11 Lunar Module (LM) Apollo Guidance Computer
(AGC) software.
The reconstruction began with source code of Luminary 99 revision 1 previously
transcribed from a digitized copy of that program. The code was then updated
by undoing changes described in original Luminary memo 85, using asterisks
indicating changed lines in the listing as a guide. While no listing of this
version is known to exist, nor are the memory-bank checksums available,
the reconstruction is believed to be correct because it was an an intermediate
step in reconstructing Luminary 97 whose reconstruction was
verified by matching memory-bank checksums to those listed in drawing 2021152G.
Note that page numbers in the reconstructed code match those on the Luminary 099
revision 001 printout, although the added code would likely have changed page
numbers for a real Luminary 98 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
054179,000002: ## Copyright: Public domain.
054180,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054181,000004: ## Purpose: A section of Luminary revision 98.
054182,000005: ## It is part of the reconstructed source code for the a
054183,000006: ## development version of the flight software for the Lunar
054184,000007: ## Module's (LM) Apollo Guidance Computer (AGC) for Apollo 11.
054185,000008: ## The code has been recreated from a copy of Luminary 99
054186,000009: ## revision 001, using asterisks indicating changed lines in
054187,000010: ## the listing and Luminary Memo #85, which lists changes between
054188,000011: ## Luminary 98 and 99.
054189,000012: ## Reference: pp. 1294-1302
054190,000013: ## Assembler: yaYUL
054191,000014: ## Contact: Ron Burkey <info@sandroid.org>.
054192,000015: ## Website: www.ibiblio.org/apollo/index.html
054193,000016: ## Mod history: 2019-07-28 MAS Created from Luminary 99.
054194,000017:
|
|
Page 1294
|
054196,000019: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054197,000020:
054198,000021: 43,3724 COUNT* $$/PHASE
054199,000022: 5311 BLOCK 02
054200,000023: 4000 SETLOC FFTAG1
054201,000024: 4000 BANK
054202,000025:
054203,000026: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054204,000027: 5312 30000 CAF 0
054205,000028: 5313 24002 INCR Q
054206,000029:
054207,000030: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054208,000031: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054209,000032: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054210,000033: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054211,000034: 5320 20213 CADR SETUPDSP
054212,000035:
054213,000036: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054214,000037:
054215,000038: 5321 50002 CHECKMM INDEX Q
054216,000039: 5322 40000 CS 0
054217,000040: 5323 61011 AD MODREG
054218,000041: 5324 00006 EXTEND
054219,000042: 5325 16741 BZF Q+2
054220,000043: 5326 16737 TCF Q+1 # NO MATCH
054221,000044:
054222,000045: 5327 6742 TCQ = Q+2 +1
054223,000046:
054224,000047: 14,3774 BANK 14
054225,000048: 10,2000 SETLOC PHASETAB
054226,000049: 10,2000 BANK
054227,000050:
054228,000051: 10,2213 COUNT* $$/PHASE
054229,000052: 10,2213 00004 SETUPDSP INHINT
054230,000053: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054231,000054: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054232,000055: 10,2216 05072 TC NOVAC # NEWMODE X
054233,000056: 10,2217 1011 EBANK= MODREG
054234,000057: 10,2217 03534 60102 2CADR DSPMMJOB
054235,000058:
054236,000059: 10,2221 52071 DXCH RUPTREG1
054237,000060: 10,2222 00003 RELINT
054238,000061: 10,2223 52006 DXCH Z # RETURN
054239,000062:
054240,000063: 10,2224 40,3534 DSPMMJOB EQUALS DSPMMJB
054241,000064:
054242,000065: 5327 BLOCK 02
054243,000066: 4000 SETLOC FFTAG1
054244,000067: 4000 BANK
054245,000068:
|
|
Page 1295
|
054247,000070: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054248,000071: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054249,000072: # TC PHASCHNG
054250,000073: # OCT XXXXX
054251,000074: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054252,000075: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054253,000076: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054254,000077: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054255,000078: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054256,000079: # LONGCALL TO BE RESTARTED.
054257,000080: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054258,000081:
054259,000082: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054260,000083: # TL0 00P PPP PPP GGG ,
054261,000084: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054262,000085: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054263,000086: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054264,000087: # IT IS SET TO 0. SOME EXAMPLES,
054265,000088: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054266,000089: # OCT 00003 MAKING GROUP 3 INACTIVE
054267,000090:
054268,000091: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054269,000092: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054270,000093:
054271,000094: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054272,000095: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054273,000096: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054274,000097: # LOCATION
054275,000098:
054276,000099: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054277,000100: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054278,000101: # LONGBASE WAS SET THIS SINGLE ENTRY
054279,000102: # SHOULD BE A LONGCALL)
054280,000103:
054281,000104: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054282,000105: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054283,000106: # LONGCALL TO BE RESTARTED
054284,000107:
054285,000108: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054286,000109: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054287,000110: # TL0 1AD XXX CJW GGG
054288,000111: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054289,000112: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054290,000113: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1296
|
054292,000115: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054293,000116: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054294,000117: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054295,000118: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054296,000119: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054297,000120: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054298,000121: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054299,000122: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054300,000123: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054301,000124: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054302,000125: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054303,000126: # AD+3 ALSO GO TO AD+3
054304,000127:
054305,000128: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054306,000129: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054307,000130: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054308,000131: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054309,000132: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054310,000133: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054311,000134: # LOCATION AD+5
054312,000135:
054313,000136: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054314,000137: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054315,000138:
054316,000139: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054317,000140: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054318,000141: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054319,000142: # TL1 DAP PPP PPP GGG
054320,000143: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054321,000144: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054322,000145: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054323,000146: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054324,000147: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054325,000148: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054326,000149: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054327,000150: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054328,000151: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054329,000152: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054330,000153: # AD+5 GO TO AD+5
054331,000154:
054332,000155: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054333,000156: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054334,000157: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054335,000158: # BY MEANS OF GROUP 5
|
|
Page 1297
|
054337,000160: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054338,000161:
054339,000162: # SUMMARY OF BITS
054340,000163: # TYPE A TL0 00P PPP PPP GGG
054341,000164: # TYPE B TL1 DAP PPP PPP GGG
054342,000165: # TYPE C TL0 1AD XXX CJW GGG
054343,000166:
|
|
Page 1298
|
054345,000168: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054346,000169: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054347,000170: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054348,000171: # TC 2PHSCHNG
054349,000172: # OCT XXXXX
054350,000173: # OCT YYYYY
054351,000174: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054352,000175: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054353,000176: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054354,000177: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054355,000178: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054356,000179: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054357,000180: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054358,000181: # AD+4 FOR GROUP 5 PHASE INFORMATION
054359,000182:
054360,000183: 5327 COUNT* $$/PHASE
054361,000184: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054362,000185: 5330 50002 NDX Q
054363,000186: 5331 30000 CA 0
054364,000187: 5332 24002 INCR Q
054365,000188: 5333 54072 TS TEMPP2
054366,000189:
054367,000190: 5334 74757 MASK OCT7
054368,000191: 5335 60000 DOUBLE
054369,000192: 5336 54071 TS TEMPG2
054370,000193:
054371,000194: 5337 30072 CA TEMPP2
054372,000195: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054373,000196: 5341 00006 EXTEND
054374,000197: 5342 74740 MP BIT12
054375,000198: 5343 56072 XCH TEMPP2
054376,000199:
054377,000200: 5344 74735 MASK BIT15
054378,000201: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054379,000202:
054380,000203: 5346 50002 INDEX Q
054381,000204: 5347 30000 CA 0
054382,000205: 5350 24002 INCR Q
054383,000206: 5351 54065 TS TEMPSW
054384,000207:
054385,000208: 5352 15363 TCF PHASJUMP
054386,000209:
054387,000210: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054388,000211: 5354 50002 INDEX Q
054389,000212: 5355 30000 CA 0
054390,000213: 5356 24002 INCR Q
054391,000214: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1299
|
054393,000216: 5360 54065 TS TEMPSW
054394,000217: 5361 34753 CA ONE
054395,000218: 5362 54066 TS TEMPSW2
054396,000219: 5363 00006 PHASJUMP EXTEND
054397,000220: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054398,000221: 5365 52006 DTCB
054399,000222:
054400,000223: 5366 E3,1400 EBANK= LST1
054401,000224: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054402,000225:
054403,000226: 5370 22073 ONEORTWO LXCH TEMPBBCN
054404,000227: 5371 22006 LXCH BBANK
054405,000228: 5372 22073 LXCH TEMPBBCN
054406,000229:
054407,000230: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054408,000231: 5374 10000 CCS A
054409,000232: 5375 17750 TCF CHECKB # IT IS OF TYPE :B:
054410,000233:
054411,000234: 5376 30062 CA TEMPP
054412,000235: 5377 74745 MASK BIT7
054413,000236: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054414,000237: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054415,000238:
054416,000239: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054417,000240: 5403 31052 CA PHSPRDT1 -2
054418,000241: 5404 54070 TS TEMPPR
054419,000242:
054420,000243: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054421,000244: 5406 74744 MASK BIT8
054422,000245: 5407 10000 CCS A
054423,000246: 5410 15427 TCF GETNEWNM
054424,000247:
054425,000248: 5411 30002 CA Q
054426,000249: 5412 54063 TS TEMPNM
054427,000250: 5413 30006 CA BB
054428,000251: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054429,000252: 5415 04007 ROR SUPERBNK
054430,000253: 5416 54064 TS TEMPBB
054431,000254:
054432,000255: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054433,000256: 5420 22073 LXCH TEMPBBCN
054434,000257: 5421 52006 DTCB
054435,000258:
054436,000259: 5422 02312 CON2ADR GENADR CON2
054437,000260:
054438,000261: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054439,000262: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054440,000263: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1300
|
054442,000265: 5426 15404 TCF CON1 -1
054443,000266:
054444,000267: 5427 00006 GETNEWNM EXTEND
054445,000268: 5430 50002 INDEX Q
054446,000269: 5431 30001 DCA 0
054447,000270: 5432 52064 DXCH TEMPNM
054448,000271: 5433 34752 CA TWO
054449,000272: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054450,000273:
054451,000274: 5435 15417 TCF TOCON2
054452,000275:
054453,000276: 5436 5024 OCT14000 EQUALS PRIO14
054454,000277: 5436 0061 TEMPG EQUALS ITEMP1
054455,000278: 5436 0062 TEMPP EQUALS ITEMP2
054456,000279: 5436 0063 TEMPNM EQUALS ITEMP3
054457,000280: 5436 0064 TEMPBB EQUALS ITEMP4
054458,000281: 5436 0065 TEMPSW EQUALS ITEMP5
054459,000282: 5436 0066 TEMPSW2 EQUALS ITEMP6
054460,000283: 5436 0070 TEMPPR EQUALS RUPTREG1
054461,000284: 5436 0071 TEMPG2 EQUALS RUPTREG2
054462,000285: 5436 0072 TEMPP2 EQUALS RUPTREG3
054463,000286:
054464,000287: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054465,000288: 5436 0000006 BB EQUALS BBANK
054466,000289:
054467,000290: 14,3774 BANK 14
054468,000291: 10,2000 SETLOC PHASETAB
054469,000292: 10,2000 BANK
054470,000293:
054471,000294: 10,2224 E3,1436 EBANK= PHSNAME1
054472,000295: 10,2224 COUNT* $$/PHASE
054473,000296: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054474,000297: 10,2225 30065 CA TEMPSW
054475,000298: 10,2226 74757 MASK OCT7
054476,000299: 10,2227 60000 DOUBLE
054477,000300: 10,2230 54061 TS TEMPG
054478,000301:
054479,000302: 10,2231 30065 CA TEMPSW
054480,000303: 10,2232 75030 MASK OCT17770
054481,000304: 10,2233 00006 EXTEND
054482,000305: 10,2234 74740 MP BIT12
054483,000306: 10,2235 54062 TS TEMPP
054484,000307:
054485,000308: 10,2236 30065 CA TEMPSW
054486,000309: 10,2237 74101 MASK OCT60000
054487,000310: 10,2240 56065 XCH TEMPSW
054488,000311: 10,2241 75024 MASK OCT14000
054489,000312: 10,2242 10000 CCS A
|
|
Page 1301
|
054491,000314: 10,2243 15370 TCF ONEORTWO
054492,000315:
054493,000316: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054494,000317: 10,2245 50061 NDX TEMPG
054495,000318: 10,2246 54751 TS PHASE1 -2
054496,000319:
054497,000320: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054498,000321: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054499,000322:
054500,000323: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054501,000324: 10,2252 40072 CS TEMPP2
054502,000325: 10,2253 22072 LXCH TEMPP2
054503,000326: 10,2254 50071 NDX TEMPG2
054504,000327: 10,2255 52751 DXCH -PHASE1 -2
054505,000328:
054506,000329: 10,2256 10066 CCS TEMPSW2
054507,000330: 10,2257 12260 NOOP # CAN:T GET HERE
054508,000331: 10,2260 12264 TCF BELOW2
054509,000332:
054510,000333: 10,2261 40025 CS TIME1
054511,000334: 10,2262 50071 NDX TEMPG2
054512,000335: 10,2263 55051 TS TBASE1 -2
054513,000336:
054514,000337: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054515,000338: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054516,000339: 10,2266 12303 TCF BELOW4 # SET NEITHER
054517,000340:
054518,000341: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054519,000342: 10,2270 50061 NDX TEMPG
054520,000343: 10,2271 55051 TS TBASE1 -2
054521,000344:
054522,000345: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054523,000346: 10,2273 62276 AD BIT14COM
054524,000347: 10,2274 10000 CCS A
054525,000348: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054526,000349: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054527,000350: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054528,000351:
054529,000352: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054530,000353: 10,2301 30025 DCA TIME2
054531,000354: 10,2302 53152 DXCH LONGBASE
054532,000355:
054533,000356: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054534,000357: 10,2304 50061 NDX TEMPG
054535,000358: 10,2305 54750 TS -PHASE1 -2
054536,000359:
054537,000360: 10,2306 30002 CA Q
054538,000361: 10,2307 22073 LXCH TEMPBBCN
054539,000362: 10,2310 00003 RELINT
054540,000363: 10,2311 52006 DTCB
|
|
Page 1302
|
054542,000365: 10,2312 22073 CON2 LXCH TEMPBBCN
054543,000366:
054544,000367: 10,2313 30062 CA TEMPP
054545,000368: 10,2314 50061 NDX TEMPG
054546,000369: 10,2315 54751 TS PHASE1 -2
054547,000370:
054548,000371: 10,2316 30070 CA TEMPPR
054549,000372: 10,2317 50061 NDX TEMPG
054550,000373: 10,2320 55052 TS PHSPRDT1 -2
054551,000374:
054552,000375: 10,2321 00006 EXTEND
054553,000376: 10,2322 30064 DCA TEMPNM
054554,000377: 10,2323 50061 NDX TEMPG
054555,000378: 10,2324 53435 DXCH PHSNAME1 -2
054556,000379:
054557,000380: 10,2325 12247 TCF BELOW1
054558,000381:
054559,000382: 7750 BLOCK 03
054560,000383: 6000 SETLOC FFTAG6
054561,000384: 6000 BANK
054562,000385:
054563,000386: 7750 COUNT* $$/PHASE
054564,000387: 7750 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054565,000388: 7751 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054566,000389: 7752 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054567,000390:
054568,000391: 7753 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054569,000392:
054570,000393:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc