Source Code
|
These source-code files are part of a reconstructed copy of LUM69 Revision 2, the
flown Apollo 10 Lunar Module (LM) Apollo Guidance Computer (AGC) software.
The reconstruction began with source code of Luminary 69 revision 0 previously
transcribed from a digitized copy of that program. The code was then updated
by back-porting the R-2 lunar potential model from previously-transcribed source
code of Luminary 99. These required changes were described in the original
Luminary memos 75 and 78. The reconstructed code was verified by
matching memory-bank checksums to those listed in drawing 2021152G. Note that
page numbers in the reconstructed code match those on the Luminary 069 printout,
although the added code would likely have changed page numbers for a real LUM69
Revision 2 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
055415,000002: ## Copyright: Public domain.
055416,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
055417,000004: ## Purpose: A section of LUM69 revision 2.
055418,000005: ## It is part of the reconstructed source code for the flown
055419,000006: ## version of the flight software for the Lunar Module's (LM)
055420,000007: ## Apollo Guidance Computer (AGC) for Apollo 10. The code has
055421,000008: ## been recreated from a copy of Luminary revsion 069, using
055422,000009: ## changes present in Luminary 099 which were described in
055423,000010: ## Luminary memos 75 and 78. The code has been adapted such
055424,000011: ## that the resulting bugger words exactly match those specified
055425,000012: ## for LUM69 revision 2 in NASA drawing 2021152B, which gives
055426,000013: ## relatively high confidence that the reconstruction is correct.
055427,000014: ## Reference: pp. 1288-1296
055428,000015: ## Assembler: yaYUL
055429,000016: ## Contact: Ron Burkey <info@sandroid.org>.
055430,000017: ## Website: www.ibiblio.org/apollo/index.html
055431,000018: ## Mod history: 2019-07-27 MAS Created from Luminary 69.
055432,000019:
|
|
Page 1288
|
055434,000021: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
055435,000022:
055436,000023: 43,3732 COUNT* $$/PHASE
055437,000024: 5311 BLOCK 02
055438,000025: 4000 SETLOC FFTAG1
055439,000026: 4000 BANK
055440,000027:
055441,000028: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
055442,000029: 5312 30000 CAF 0
055443,000030: 5313 24002 INCR Q
055444,000031:
055445,000032: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
055446,000033: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
055447,000034: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
055448,000035: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
055449,000036: 5320 20071 CADR SETUPDSP
055450,000037:
055451,000038: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
055452,000039:
055453,000040: 5321 50002 CHECKMM INDEX Q
055454,000041: 5322 40000 CS 0
055455,000042: 5323 61011 AD MODREG
055456,000043: 5324 00006 EXTEND
055457,000044: 5325 16740 BZF Q+2
055458,000045: 5326 16736 TCF Q+1 # NO MATCH
055459,000046:
055460,000047: 5327 6741 TCQ = Q+2 +1
055461,000048:
055462,000049: 14,3711 BANK 14
055463,000050: 10,2000 SETLOC PHASETAB
055464,000051: 10,2000 BANK
055465,000052:
055466,000053: 10,2071 COUNT* $$/PHASE
055467,000054: 10,2071 00004 SETUPDSP INHINT
055468,000055: 10,2072 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
055469,000056: 10,2073 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
055470,000057: 10,2074 05072 TC NOVAC # NEWMODE X
055471,000058: 10,2075 1011 EBANK= MODREG
055472,000059: 10,2075 03532 60102 2CADR DSPMMJOB
055473,000060:
055474,000061: 10,2077 52071 DXCH RUPTREG1
055475,000062: 10,2100 00003 RELINT
055476,000063: 10,2101 52006 DXCH Z # RETURN
055477,000064:
055478,000065: 10,2102 40,3532 DSPMMJOB EQUALS DSPMMJB
055479,000066:
055480,000067: 5327 BLOCK 02
055481,000068: 4000 SETLOC FFTAG1
055482,000069: 4000 BANK
055483,000070:
|
|
Page 1289
|
055485,000072: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
055486,000073: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
055487,000074: # TC PHASCHNG
055488,000075: # OCT XXXXX
055489,000076: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
055490,000077: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
055491,000078: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
055492,000079: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
055493,000080: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
055494,000081: # LONGCALL TO BE RESTARTED.
055495,000082: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
055496,000083:
055497,000084: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
055498,000085: # TL0 00P PPP PPP GGG ,
055499,000086: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
055500,000087: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
055501,000088: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
055502,000089: # IT IS SET TO 0. SOME EXAMPLES,
055503,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
055504,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
055505,000092:
055506,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
055507,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
055508,000095:
055509,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
055510,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
055511,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
055512,000099: # LOCATION
055513,000100: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
055514,000101: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
055515,000102: # LONGBASE WAS SET THIS SINGLE ENTRY
055516,000103: # SHOULD BE A LONGCALL)
055517,000104:
055518,000105: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
055519,000106: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
055520,000107: # LONGCALL TO BE RESTARTED
055521,000108:
055522,000109: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
055523,000110: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
055524,000111: # TL0 1AD XXX CJW GGG
055525,000112: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
055526,000113: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
055527,000114: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1290
|
055529,000116: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
055530,000117: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
055531,000118: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
055532,000119: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
055533,000120: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
055534,000121: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
055535,000122: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
055536,000123: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
055537,000124: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
055538,000125: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
055539,000126: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
055540,000127: # AD+3 ALSO GO TO AD+3
055541,000128:
055542,000129: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
055543,000130: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
055544,000131: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
055545,000132: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
055546,000133: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
055547,000134: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
055548,000135: # LOCATION AD+5
055549,000136:
055550,000137: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
055551,000138: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
055552,000139:
055553,000140: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
055554,000141: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
055555,000142: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
055556,000143: # TL1 DAP PPP PPP GGG
055557,000144: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
055558,000145: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
055559,000146: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
055560,000147: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
055561,000148: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
055562,000149: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
055563,000150: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
055564,000151: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
055565,000152: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
055566,000153: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
055567,000154: # AD+5 GO TO AD+5
055568,000155:
055569,000156: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
055570,000157: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
055571,000158: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
055572,000159: # BY MEANS OF GROUP 5
|
|
Page 1291
|
055574,000161: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
055575,000162:
055576,000163: # SUMMARY OF BITS
055577,000164: # TYPE A TL0 00P PPP PPP GGG
055578,000165: # TYPE B TL1 DAP PPP PPP GGG
055579,000166: # TYPE C TL0 1AD XXX CJW GGG
055580,000167:
|
|
Page 1292
|
055582,000169: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
055583,000170: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
055584,000171: # CALLS ARE MADE IN THE FOLLOWING MANNER,
055585,000172: # TC 2PHSCHNG
055586,000173: # OCT XXXXX
055587,000174: # OCT YYYYY
055588,000175: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPEC. THERE IS ONE
055589,000176: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
055590,000177: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
055591,000178: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
055592,000179: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
055593,000180: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
055594,000181: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
055595,000182: # AD+4 FOR GROUP 5 PHASE INFORMATION
055596,000183:
055597,000184: 5327 COUNT* $$/PHASE
055598,000185: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
055599,000186: 5330 50002 NDX Q
055600,000187: 5331 30000 CA 0
055601,000188: 5332 24002 INCR Q
055602,000189: 5333 54072 TS TEMPP2
055603,000190:
055604,000191: 5334 74757 MASK OCT7
055605,000192: 5335 60000 DOUBLE
055606,000193: 5336 54071 TS TEMPG2
055607,000194:
055608,000195: 5337 30072 CA TEMPP2
055609,000196: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
055610,000197: 5341 00006 EXTEND
055611,000198: 5342 74740 MP BIT12
055612,000199: 5343 56072 XCH TEMPP2
055613,000200:
055614,000201: 5344 74735 MASK BIT15
055615,000202: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
055616,000203:
055617,000204: 5346 50002 INDEX Q
055618,000205: 5347 30000 CA 0
055619,000206: 5350 24002 INCR Q
055620,000207: 5351 54065 TS TEMPSW
055621,000208:
055622,000209: 5352 15363 TCF PHASJUMP
055623,000210:
055624,000211: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
055625,000212: 5354 50002 INDEX Q
055626,000213: 5355 30000 CA 0
055627,000214: 5356 24002 INCR Q
055628,000215: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1293
|
055630,000217: 5360 54065 TS TEMPSW
055631,000218: 5361 34753 CA ONE
055632,000219: 5362 54066 TS TEMPSW2
055633,000220: 5363 00006 PHASJUMP EXTEND
055634,000221: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
055635,000222: 5365 52006 DTCB
055636,000223:
055637,000224: 5366 E3,1400 EBANK= LST1
055638,000225: 5366 02102 20103 ADRPCHN2 2CADR PHSCHNG2
055639,000226:
055640,000227: 5370 22073 ONEORTWO LXCH TEMPBBCN
055641,000228: 5371 22006 LXCH BBANK
055642,000229: 5372 22073 LXCH TEMPBBCN
055643,000230:
055644,000231: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
055645,000232: 5374 10000 CCS A
055646,000233: 5375 17747 TCF CHECKB # IT IS OF TYPE :B:
055647,000234:
055648,000235: 5376 30062 CA TEMPP
055649,000236: 5377 74745 MASK BIT7
055650,000237: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
055651,000238: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
055652,000239:
055653,000240: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
055654,000241: 5403 31052 CA PHSPRDT1 -2
055655,000242: 5404 54070 TS TEMPPR
055656,000243:
055657,000244: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
055658,000245: 5406 74744 MASK BIT8
055659,000246: 5407 10000 CCS A
055660,000247: 5410 15427 TCF GETNEWNM
055661,000248:
055662,000249: 5411 30002 CA Q
055663,000250: 5412 54063 TS TEMPNM
055664,000251: 5413 30006 CA BB
055665,000252: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
055666,000253: 5415 04007 ROR SUPERBNK
055667,000254: 5416 54064 TS TEMPBB
055668,000255:
055669,000256: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
055670,000257: 5420 22073 LXCH TEMPBBCN
055671,000258: 5421 52006 DTCB
055672,000259:
055673,000260: 5422 02170 CON2ADR GENADR CON2
055674,000261:
055675,000262: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
055676,000263: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
055677,000264: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1294
|
055679,000266: 5426 15404 TCF CON1 -1
055680,000267:
055681,000268: 5427 00006 GETNEWNM EXTEND
055682,000269: 5430 50002 INDEX Q
055683,000270: 5431 30001 DCA 0
055684,000271: 5432 52064 DXCH TEMPNM
055685,000272: 5433 34752 CA TWO
055686,000273: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
055687,000274:
055688,000275: 5435 15417 TCF TOCON2
055689,000276:
055690,000277: 5436 5024 OCT14000 EQUALS PRIO14
055691,000278: 5436 0061 TEMPG EQUALS ITEMP1
055692,000279: 5436 0062 TEMPP EQUALS ITEMP2
055693,000280: 5436 0063 TEMPNM EQUALS ITEMP3
055694,000281: 5436 0064 TEMPBB EQUALS ITEMP4
055695,000282: 5436 0065 TEMPSW EQUALS ITEMP5
055696,000283: 5436 0066 TEMPSW2 EQUALS ITEMP6
055697,000284: 5436 0070 TEMPPR EQUALS RUPTREG1
055698,000285: 5436 0071 TEMPG2 EQUALS RUPTREG2
055699,000286: 5436 0072 TEMPP2 EQUALS RUPTREG3
055700,000287:
055701,000288: 5436 0073 TEMPBBCN EQUALS RUPTREG4
055702,000289: 5436 0000006 BB EQUALS BBANK
055703,000290:
055704,000291: 14,3711 BANK 14
055705,000292: 10,2000 SETLOC PHASETAB
055706,000293: 10,2000 BANK
055707,000294:
055708,000295: 10,2102 E3,1436 EBANK= PHSNAME1
055709,000296: 10,2102 COUNT* $$/PHASE
055710,000297: 10,2102 22073 PHSCHNG2 LXCH TEMPBBCN
055711,000298: 10,2103 30065 CA TEMPSW
055712,000299: 10,2104 74757 MASK OCT7
055713,000300: 10,2105 60000 DOUBLE
055714,000301: 10,2106 54061 TS TEMPG
055715,000302:
055716,000303: 10,2107 30065 CA TEMPSW
055717,000304: 10,2110 75030 MASK OCT17770
055718,000305: 10,2111 00006 EXTEND
055719,000306: 10,2112 74740 MP BIT12
055720,000307: 10,2113 54062 TS TEMPP
055721,000308:
055722,000309: 10,2114 30065 CA TEMPSW
055723,000310: 10,2115 74101 MASK OCT60000
055724,000311: 10,2116 56065 XCH TEMPSW
055725,000312: 10,2117 75024 MASK OCT14000
055726,000313: 10,2120 10000 CCS A
|
|
Page 1295
|
055728,000315: 10,2121 15370 TCF ONEORTWO
055729,000316:
055730,000317: 10,2122 30062 CA TEMPP # START STORING THE PHASE INFORMATION
055731,000318: 10,2123 50061 NDX TEMPG
055732,000319: 10,2124 54751 TS PHASE1 -2
055733,000320:
055734,000321: 10,2125 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
055735,000322: 10,2126 12142 TCF BELOW2 # IT:S A PHASCHNG
055736,000323:
055737,000324: 10,2127 12130 TCF +1 # IT:S A 2PHSCHNG
055738,000325: 10,2130 40072 CS TEMPP2
055739,000326: 10,2131 22072 LXCH TEMPP2
055740,000327: 10,2132 50071 NDX TEMPG2
055741,000328: 10,2133 52751 DXCH -PHASE1 -2
055742,000329:
055743,000330: 10,2134 10066 CCS TEMPSW2
055744,000331: 10,2135 12136 NOOP # CAN:T GET HERE
055745,000332: 10,2136 12142 TCF BELOW2
055746,000333:
055747,000334: 10,2137 40025 CS TIME1
055748,000335: 10,2140 50071 NDX TEMPG2
055749,000336: 10,2141 55051 TS TBASE1 -2
055750,000337:
055751,000338: 10,2142 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
055752,000339: 10,2143 12156 TCF BELOW3 # SET LONGBASE ONLY
055753,000340: 10,2144 12161 TCF BELOW4 # SET NEITHER
055754,000341:
055755,000342: 10,2145 40025 CS TIME1 # SET TBASE TO BEGIN WITH
055756,000343: 10,2146 50061 NDX TEMPG
055757,000344: 10,2147 55051 TS TBASE1 -2
055758,000345:
055759,000346: 10,2150 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
055760,000347: 10,2151 62154 AD BIT14COM
055761,000348: 10,2152 10000 CCS A
055762,000349: 10,2153 12154 NOOP # ***** CANT GET HERE *****
055763,000350: 10,2154 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
055764,000351: 10,2155 12161 TCF BELOW4 # NO WE NEED ONLY SET TBASE
055765,000352:
055766,000353: 10,2156 00006 BELOW3 EXTEND # SET LONGBASE
055767,000354: 10,2157 30025 DCA TIME2
055768,000355: 10,2160 53152 DXCH LONGBASE
055769,000356:
055770,000357: 10,2161 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
055771,000358: 10,2162 50061 NDX TEMPG
055772,000359: 10,2163 54750 TS -PHASE1 -2
055773,000360:
055774,000361: 10,2164 30002 CA Q
055775,000362: 10,2165 22073 LXCH TEMPBBCN
055776,000363: 10,2166 00003 RELINT
055777,000364: 10,2167 52006 DTCB
|
|
Page 1296
|
055779,000366: 10,2170 22073 CON2 LXCH TEMPBBCN
055780,000367:
055781,000368: 10,2171 30062 CA TEMPP
055782,000369: 10,2172 50061 NDX TEMPG
055783,000370: 10,2173 54751 TS PHASE1 -2
055784,000371:
055785,000372: 10,2174 30070 CA TEMPPR
055786,000373: 10,2175 50061 NDX TEMPG
055787,000374: 10,2176 55052 TS PHSPRDT1 -2
055788,000375:
055789,000376: 10,2177 00006 EXTEND
055790,000377: 10,2200 30064 DCA TEMPNM
055791,000378: 10,2201 50061 NDX TEMPG
055792,000379: 10,2202 53435 DXCH PHSNAME1 -2
055793,000380:
055794,000381: 10,2203 12125 TCF BELOW1
055795,000382:
055796,000383: 7747 BLOCK 03
055797,000384: 6000 SETLOC FFTAG6
055798,000385: 6000 BANK
055799,000386:
055800,000387: 7747 COUNT* $$/PHASE
055801,000388: 7747 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
055802,000389: 7750 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
055803,000390: 7751 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
055804,000391:
055805,000392: 7752 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
055806,000393:
055807,000394:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc