Source Code
|
These source-code files are part of a reconstructed copy of Comanche 051, the
original release of the Apollo 11 Command Module (CM) Apollo Guidance Computer
(AGC) software.
The reconstruction began with source code of Comanche 055 previously transcribed
from a digitized copy of that program. The code was then updated by undoing
changes related to the R-2 lunar potential model, using hints from program
comments and change-indicating asterisks in the Comanche 055 listing as a guide.
The reconstruction was verified by matching memory-bank checksums to those listed
in drawing 2021153D. Note that page numbers in the reconstructed code match those
on the Comanche 055 printout, although the added code would likely have changed page
numbers for a real Comanche 051 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
059651,000002: ## Copyright: Public domain.
059652,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
059653,000004: ## Purpose: A section of Comanche revision 051.
059654,000005: ## It is part of the reconstructed source code for the
059655,000006: ## original release of the flight software for the Command
059656,000007: ## Module's (CM) Apollo Guidance Computer (AGC) for Apollo 11.
059657,000008: ## The code has been recreated from a copy of Comanche 055. It
059658,000009: ## has been adapted such that the resulting bugger words
059659,000010: ## exactly match those specified for Comanche 51 in NASA drawing
059660,000011: ## 2021153D, which gives relatively high confidence that the
059661,000012: ## reconstruction is correct.
059662,000013: ## Reference: pp. 1404-1413
059663,000014: ## Assembler: yaYUL
059664,000015: ## Contact: Ron Burkey <info@sandroid.org>.
059665,000016: ## Website: www.ibiblio.org/apollo/index.html
059666,000017: ## Mod history: 2019-07-30 MAS Created from Comanche 55.
059667,000018:
|
|
Page 1404
|
059669,000020: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
059670,000021:
059671,000022: 43,3726 COUNT 02/PHASE
059672,000023: 5354 BLOCK 02
059673,000024: 4000 SETLOC FFTAG1
059674,000025: 4000 BANK
059675,000026:
059676,000027: 5354 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
059677,000028: 5355 30000 CAF 0
059678,000029: 5356 24002 INCR Q
059679,000030:
059680,000031: 5357 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
059681,000032: 5360 35363 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
059682,000033: 5361 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
059683,000034: 5362 14704 TCF BANKJUMP # PUTS Q INTO A
059684,000035: 5363 20440 CADR SETUPDSP
059685,000036:
059686,000037: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
059687,000038:
059688,000039: 5364 50002 CHECKMM INDEX Q
059689,000040: 5365 40000 CS 0
059690,000041: 5366 61011 AD MODREG
059691,000042: 5367 00006 EXTEND
059692,000043: 5370 16710 BZF Q+2
059693,000044: 5371 16706 TCF Q+1 # NO MATCH
059694,000045:
059695,000046: 5372 6711 TCQ = Q+2 +1
059696,000047:
059697,000048: 14,3761 BANK 14
059698,000049: 10,2000 SETLOC PHASETAB
059699,000050: 10,2000 BANK
059700,000051:
059701,000052: 10,2440 COUNT 10/PHASE
059702,000053:
059703,000054: 10,2440 00004 SETUPDSP INHINT
059704,000055: 10,2441 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
059705,000056: 10,2442 34371 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
059706,000057: 10,2443 05134 TC NOVAC # NEWMODEX
059707,000058: 10,2444 1011 EBANK= MODREG
059708,000059: 10,2444 03441 60102 2CADR DSPMMJOB
059709,000060:
059710,000061: 10,2446 52071 DXCH RUPTREG1
059711,000062: 10,2447 00003 RELINT
059712,000063: 10,2450 52006 DXCH Z # RETURN
059713,000064:
059714,000065: 10,2451 40,3441 DSPMMJOB EQUALS DSPMMJB
059715,000066:
059716,000067: 5372 BLOCK 02
|
|
Page 1405
|
059718,000069: 4000 SETLOC FFTAG1
059719,000070: 4000 BANK
059720,000071:
|
|
Page 1406
|
059722,000073: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
059723,000074: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
059724,000075: # TC PHASCHNG
059725,000076: # OCT XXXXX
059726,000077: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
059727,000078: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
059728,000079: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
059729,000080: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
059730,000081: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
059731,000082: # LONGCALL TO BE RESTARTED.
059732,000083: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
059733,000084:
059734,000085: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
059735,000086: # TL0 00P PPP PPP GGG ,
059736,000087: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
059737,000088: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
059738,000089: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
059739,000090: # IT IS SET TO 0. SOME EXAMPLES,
059740,000091: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
059741,000092: # OCT 00003 MAKING GROUP 3 INACTIVE
059742,000093:
059743,000094: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
059744,000095: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
059745,000096:
059746,000097: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
059747,000098: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
059748,000099: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
059749,000100: # LOCATION
059750,000101:
059751,000102: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
059752,000103: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
059753,000104: # LONGBASE WAS SET THIS SINGLE ENTRY
059754,000105: # SHOULD BE A LONGCALL)
059755,000106:
059756,000107: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
059757,000108: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
059758,000109: # LONGCALL TO BE RESTARTED
059759,000110:
059760,000111: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
059761,000112: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
059762,000113: # TL0 1AD XXX CJW GGG
059763,000114: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
059764,000115: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
059765,000116: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1407
|
059767,000118: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
059768,000119: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
059769,000120: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
059770,000121: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
059771,000122: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
059772,000123: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
059773,000124: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
059774,000125: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
059775,000126: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
059776,000127: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
059777,000128: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
059778,000129: # AD+3 ALSO GO TO AD+3
059779,000130:
059780,000131: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
059781,000132: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
059782,000133: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
059783,000134: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
059784,000135: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
059785,000136: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
059786,000137: # LOCATION AD+5
059787,000138:
059788,000139: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
059789,000140: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
059790,000141:
059791,000142: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
059792,000143: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
059793,000144: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
059794,000145: # TL1 DAP PPP PPP GGG
059795,000146: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
059796,000147: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
059797,000148: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
059798,000149: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
059799,000150: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
059800,000151: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
059801,000152: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
059802,000153: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
059803,000154: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
059804,000155: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
059805,000156: # AD+5 GO TO AD+5
059806,000157:
059807,000158: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
059808,000159: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
059809,000160: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
059810,000161: # BY MEANS OF GROUP 5
|
|
Page 1408
|
059812,000163: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
059813,000164:
059814,000165: # SUMMARY OF BITS
059815,000166: # TYPE A TL0 00P PPP PPP GGG
059816,000167: # TYPE B TL1 DAP PPP PPP GGG
059817,000168: # TYPE C TL0 1AD XXX CJW GGG
059818,000169:
|
|
Page 1409
|
059820,000171: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
059821,000172: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
059822,000173: # CALLS ARE MADE IN THE FOLLOWING MANNER,
059823,000174: # TC 2PHSCHNG
059824,000175: # OCT XXXXX
059825,000176: # OCT YYYYY
059826,000177: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
059827,000178: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
059828,000179: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
059829,000180: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
059830,000181: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
059831,000182: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
059832,000183: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
059833,000184: # AD+4 FOR GROUP 5 PHASE INFORMATION
059834,000185:
059835,000186: 5372 COUNT 02/PHASE
059836,000187:
059837,000188: 5372 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
059838,000189: 5373 50002 NDX Q
059839,000190: 5374 30000 CA 0
059840,000191: 5375 24002 INCR Q
059841,000192: 5376 54072 TS TEMPP2
059842,000193:
059843,000194: 5377 75023 MASK OCT7
059844,000195: 5400 60000 DOUBLE
059845,000196: 5401 54071 TS TEMPG2
059846,000197:
059847,000198: 5402 30072 CA TEMPP2
059848,000199: 5403 75072 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
059849,000200: 5404 00006 EXTEND
059850,000201: 5405 75004 MP BIT12
059851,000202: 5406 56072 XCH TEMPP2
059852,000203:
059853,000204: 5407 75001 MASK BIT15
059854,000205: 5410 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
059855,000206:
059856,000207: 5411 15415 TCF PHASCHNG +3
059857,000208:
059858,000209: 5412 00004 PHASCHNG INHINT
059859,000210: 5413 35017 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
059860,000211: 5414 54066 TS TEMPSW2
059861,000212:
059862,000213: 5415 50002 NDX Q
059863,000214: 5416 30000 CA 0
059864,000215: 5417 24002 INCR Q
059865,000216: 5420 54065 TS TEMPSW
|
|
Page 1410
|
059867,000218: 5421 00006 EXTEND
059868,000219: 5422 35425 DCA ADRPCHN2 # OFF TO SWITCHED BANK
059869,000220: 5423 52006 DTCB
059870,000221:
059871,000222: 5424 E3,1400 EBANK= LST1
059872,000223: 5424 02451 20063 ADRPCHN2 2CADR PHSCHNG2
059873,000224:
059874,000225: 5426 22073 ONEORTWO LXCH TEMPBBCN
059875,000226: 5427 22006 LXCH BBANK
059876,000227: 5430 22073 LXCH TEMPBBCN
059877,000228:
059878,000229: 5431 75066 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
059879,000230: 5432 10000 CCS A
059880,000231: 5433 15474 TCF CHECKB # IT IS OF TYPE :B:
059881,000232:
059882,000233: 5434 30062 CA TEMPP
059883,000234: 5435 75011 MASK BIT7
059884,000235: 5436 10000 CCS A # SHALL WE USE THE OLD PRIORITY
059885,000236: 5437 15461 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
059886,000237:
059887,000238: 5440 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
059888,000239: 5441 31052 CA PHSPRDT1 -2
059889,000240: 5442 54070 TS TEMPPR
059890,000241:
059891,000242: 5443 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
059892,000243: 5444 75010 MASK BIT8
059893,000244: 5445 10000 CCS A
059894,000245: 5446 15465 TCF GETNEWNM
059895,000246:
059896,000247: 5447 30002 CA Q
059897,000248: 5450 54063 TS TEMPNM
059898,000249: 5451 30006 CA BB
059899,000250: 5452 00006 EXTEND # PICK UP USERS SUPERBANK
059900,000251: 5453 04007 ROR SUPERBNK
059901,000252: 5454 54064 TS TEMPBB
059902,000253:
059903,000254: 5455 35460 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
059904,000255: 5456 22073 LXCH TEMPBBCN
059905,000256: 5457 52006 DTCB
059906,000257:
059907,000258: 5460 02537 CON2ADR GENADR CON2
059908,000259:
059909,000260: 5461 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
059910,000261: 5462 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
059911,000262: 5463 24002 INCR Q # OBTAIN RETURN ADDRESS
059912,000263: 5464 15442 TCF CON1 -1
059913,000264:
059914,000265: 5465 00006 GETNEWNM EXTEND
|
|
Page 1411
|
059916,000267: 5466 50002 INDEX Q
059917,000268: 5467 30001 DCA 0
059918,000269: 5470 52064 DXCH TEMPNM
059919,000270: 5471 35016 CA TWO
059920,000271: 5472 26002 ADS Q # OBTAIN RETURN ADDRESS
059921,000272:
059922,000273: 5473 15455 TCF TOCON2
059923,000274:
059924,000275: 5474 5066 OCT14000 EQUALS PRIO14
059925,000276: 5474 0061 TEMPG EQUALS ITEMP1
059926,000277: 5474 0062 TEMPP EQUALS ITEMP2
059927,000278: 5474 0063 TEMPNM EQUALS ITEMP3
059928,000279: 5474 0064 TEMPBB EQUALS ITEMP4
059929,000280: 5474 0065 TEMPSW EQUALS ITEMP5
059930,000281: 5474 0066 TEMPSW2 EQUALS ITEMP6
059931,000282: 5474 0070 TEMPPR EQUALS RUPTREG1
059932,000283: 5474 0071 TEMPG2 EQUALS RUPTREG2
059933,000284: 5474 0072 TEMPP2 EQUALS RUPTREG3
059934,000285:
059935,000286: 5474 0073 TEMPBBCN EQUALS RUPTREG4
059936,000287: 5474 0000006 BB EQUALS BBANK
059937,000288:
059938,000289: 14,3761 BANK 14
059939,000290: 10,2000 SETLOC PHASETAB
059940,000291: 10,2000 BANK
059941,000292:
059942,000293: 10,2451 E3,1436 EBANK= PHSNAME1
059943,000294: 10,2451 COUNT 10/PHASE
059944,000295:
059945,000296: 10,2451 22073 PHSCHNG2 LXCH TEMPBBCN
059946,000297: 10,2452 30065 CA TEMPSW
059947,000298: 10,2453 75023 MASK OCT7
059948,000299: 10,2454 60000 DOUBLE
059949,000300: 10,2455 54061 TS TEMPG
059950,000301:
059951,000302: 10,2456 30065 CA TEMPSW
059952,000303: 10,2457 75072 MASK OCT17770
059953,000304: 10,2460 00006 EXTEND
059954,000305: 10,2461 75004 MP BIT12
059955,000306: 10,2462 54062 TS TEMPP
059956,000307:
059957,000308: 10,2463 30065 CA TEMPSW
059958,000309: 10,2464 74105 MASK OCT60000
059959,000310: 10,2465 56065 XCH TEMPSW
059960,000311: 10,2466 75066 MASK OCT14000
059961,000312: 10,2467 10000 CCS A
059962,000313: 10,2470 15426 TCF ONEORTWO
059963,000314:
|
|
Page 1412
|
059965,000316: 10,2471 30062 CA TEMPP # START STORING THE PHASE INFORMATION
059966,000317: 10,2472 50061 NDX TEMPG
059967,000318: 10,2473 54751 TS PHASE1 -2
059968,000319:
059969,000320: 10,2474 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
059970,000321: 10,2475 12511 TCF BELOW2 # IT:S A PHASCHNG
059971,000322:
059972,000323: 10,2476 12477 TCF +1 # IT:S A 2PHSCHNG
059973,000324: 10,2477 40072 CS TEMPP2
059974,000325: 10,2500 22072 LXCH TEMPP2
059975,000326: 10,2501 50071 NDX TEMPG2
059976,000327: 10,2502 52751 DXCH -PHASE1 -2
059977,000328:
059978,000329: 10,2503 10066 CCS TEMPSW2
059979,000330: 10,2504 12505 NOOP # CAN:T GET HERE
059980,000331: 10,2505 12511 TCF BELOW2
059981,000332:
059982,000333: 10,2506 40025 CS TIME1
059983,000334: 10,2507 50071 NDX TEMPG2
059984,000335: 10,2510 55051 TS TBASE1 -2
059985,000336:
059986,000337: 10,2511 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
059987,000338: 10,2512 12525 TCF BELOW3 # SET LONGBASE ONLY
059988,000339: 10,2513 12530 TCF BELOW4 # SET NEITHER
059989,000340:
059990,000341: 10,2514 40025 CS TIME1 # SET TBASE TO BEGIN WITH
059991,000342: 10,2515 50061 NDX TEMPG
059992,000343: 10,2516 55051 TS TBASE1 -2
059993,000344:
059994,000345: 10,2517 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
059995,000346: 10,2520 62523 AD BIT14COM
059996,000347: 10,2521 10000 CCS A
059997,000348: 10,2522 12523 NOOP # ***** CANT GET HERE *****
059998,000349: 10,2523 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
059999,000350: 10,2524 12530 TCF BELOW4 # NO WE NEED ONLY SET TBASE
060000,000351:
060001,000352: 10,2525 00006 BELOW3 EXTEND # SET LONGBASE
060002,000353: 10,2526 30025 DCA TIME2
060003,000354: 10,2527 53136 DXCH LONGBASE
060004,000355:
060005,000356: 10,2530 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
060006,000357: 10,2531 50061 NDX TEMPG
060007,000358: 10,2532 54750 TS -PHASE1 -2
060008,000359:
060009,000360: 10,2533 30002 CA Q
060010,000361: 10,2534 22073 LXCH TEMPBBCN
060011,000362: 10,2535 00003 RELINT
060012,000363: 10,2536 52006 DTCB
060013,000364: 10,2537 22073 CON2 LXCH TEMPBBCN
|
|
Page 1413
|
060015,000366: 10,2540 30062 CA TEMPP
060016,000367: 10,2541 50061 NDX TEMPG
060017,000368: 10,2542 54751 TS PHASE1 -2
060018,000369:
060019,000370: 10,2543 30070 CA TEMPPR
060020,000371: 10,2544 50061 NDX TEMPG
060021,000372: 10,2545 55052 TS PHSPRDT1 -2
060022,000373:
060023,000374: 10,2546 00006 EXTEND
060024,000375: 10,2547 30064 DCA TEMPNM
060025,000376: 10,2550 50061 NDX TEMPG
060026,000377: 10,2551 53435 DXCH PHSNAME1 -2
060027,000378:
060028,000379: 10,2552 12474 TCF BELOW1
060029,000380:
060030,000381: 5474 BLOCK 02
060031,000382: 4000 SETLOC FFTAG1
060032,000383: 4000 BANK
060033,000384:
060034,000385: 5474 COUNT 02/PHASE
060035,000386:
060036,000387: 5474 75004 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
060037,000388: 5475 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
060038,000389: 5476 15461 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
060039,000390:
060040,000391: 5477 15440 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
060041,000392:
060042,000393:
060043,000394:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc